It has a wide range of uses in domestic water supply, industry, and construction.
Model :
MS70/0.37Imported caliber (DN) :
32Export caliber (DN) :
25Rated flow (m³/h) :
4Rated head (m) :
13Motor speed (rpm) :
2900Motor power (kw) :
0.37Material :
304FOB Price （USD$） :
139Horizontal Stainless Steel Single - Stage Centrifugal Pump
Technical parameter:
Flow rate, Q: maximum 9.6 m³/h
Head, H: maximum 30m
Product overview
AMS series is horizontal stainless steel single stage centrifugal pump, with a wide range of uses in domestic water supply, industrial, construction. It can be used in: liquid delivery and circulation in light industry; pressurization and domestic water supply, but also widely used in cooling systems and air conditioning systems.
Working conditions
When the density of the medium transported by thin, clean, non-corrosive, non-flammable and explosive is greater than clear water, high-power motor shall be used
Temperature range of the liquid: 0℃ to 85℃
Maximum ambient temperature: + 40℃
Maximum suction range: related to pump NPSH (steam corrosion margin), medium temperature, sea level height of installation location, and inlet pipeline loss
Maximum work pressure: 8bar
Electrical Appliances
Pump is equipped with fully closed, air-cooled, mouse cage fan;
Protection level: IPX 4
insulation grade:F
Standard voltage：Single phase 220-240V, 50Hz
Three-phase 380-415V, 50Hz
Single-phase generator is equipped with built-in thermal protection device, and the three-phase motor must be connected to the motor starter according to local regulations
Horizontal type, using extended coupling, single-stage radial split volute (pump size larger than 125 adopts two-stage design) adopts back-pumping design, with replaceable shaft sleeve/shaft protection sleeve and replaceable pump body sealing ring, and the design conforms to ATEX；
Read More
Product overview Horizontal, single-machine direct-connected single-stage radial split volute, rated power conforms to EN 733 standard, with replaceable shaft sleeve and pump body sealing ring, and the design conforms to ATEX
Read More
A vertically installed multistage high-pressure centrifugal pump with annular cross-section design is equipped with suction nozzles and nozzles (pipeline design) with the same nominal diameter and relatively designed positions, which are directly connected and designed according to ATEX；
Read More
CR and CRE pumps are non-self-priming, vertical multistage centrifugal pumps.
Read More
For conveying water and other liquids similar to water.
Read More
The DP small submersible electric pump is a small-scale electric irrigation and drainage device that integrates an asynchronous motor and a centrifugal water pump.
Read More
It is used to convey clean water and other liquids with properties similar to those of water.
Read More
IPv6 network supported.
