LRP series products are canned circulation pumps featuring high efficiency and low noise. They have the characteristics of high energy efficiency, low noise level, no leakage, convenient installation and long service life.
Model :
LRP15-40/130Imported caliber (DN) :
15Export caliber (DN) :
15Rated flow (m³/h) :
45/42/28Rated head (m) :
4.4/4/3.6Motor power (kw) :
74/54/34Material :
Cast iron pump casing/plastic impellerFOB Price （USD$） :
41Hot Water Circulation Canned Motor Pump
Technical parameter:
Flow rate, Q: Maximum 170 m³/h
Head, H: maximum 11m
Application environment
This type of pump is mainly widely used in HVAC circulation, household pressurization, solar pressurization, industrial supporting, household cold and hot water circulation, cooling and air conditioning system; (water temperature 2℃ ~110℃, automatic temperature 60℃)
Pump
It is mainly composed of pump body and impeller, which adopts engineering plastic with high strength, high wear resistance and high temperature resistance
The motor part is mainly made of stator, rotor, shield sleeve, bearing and other components, the bearing system adopts sliding bearing system, and the rotating shaft and bearing are made of ceramic with high strength, high wear resistance and high temperature resistance of alumina.
Electrical Appliances
The stator and rotor are sealed with stainless steel sleeve, and the pump and motor are static seal without leakage;
Using internal circulation mode, bearing by pumping liquid as lubricant and cooling the motor;
Motor insulation level is "Grade H";
The leakage screws are of AISI304 material;
Speed regulating shield pump, there are three gears for users to choose.
Horizontal type, using extended coupling, single-stage radial split volute (pump size larger than 125 adopts two-stage design) adopts back-pumping design, with replaceable shaft sleeve/shaft protection sleeve and replaceable pump body sealing ring, and the design conforms to ATEX；
Read More
Product overview Horizontal, single-machine direct-connected single-stage radial split volute, rated power conforms to EN 733 standard, with replaceable shaft sleeve and pump body sealing ring, and the design conforms to ATEX
Read More
A vertically installed multistage high-pressure centrifugal pump with annular cross-section design is equipped with suction nozzles and nozzles (pipeline design) with the same nominal diameter and relatively designed positions, which are directly connected and designed according to ATEX；
Read More
CR and CRE pumps are non-self-priming, vertical multistage centrifugal pumps.
Read More
For conveying water and other liquids similar to water.
Read More
The DP small submersible electric pump is a small-scale electric irrigation and drainage device that integrates an asynchronous motor and a centrifugal water pump.
Read More
It is used to convey clean water and other liquids with properties similar to those of water.
Read More
IPv6 network supported.
