Xylem Lowara E1631 Series Horizontal Single-Stage End-Suction Pump
Single-stage centrifugal end-suction pump
Model :
e1631 1.5A 7.5KW 2P/C3FAAACS4Imported caliber (DN) :
65Export caliber (DN) :
40Rated flow (m³/h) :
40Rated head (m) :
30Motor speed (rpm) :
2900Motor power (kw) :
7.5Material :
grey iron/304Horizontal Single-Stage End-Suction Pump
Technical parameters:
Flow rate, q: 1800 m3/h max.
Head, h: up to 160m.
Pressure, p: 16bar/25bar max.
Temperature, t:-20℃-+140℃
Rated speed: 2900rpm, 1450rpm, 975rpm.
Overcurrent material: AISI304/316/316L/ dual-phase steel.
Product overview
Single-stage centrifugal end-suction pump, the standard pressure is 16Bar, e1631 adopts a rigid short shaft connected with the standard motor shaft through a key, and both motors can be selected. Cast iron is the standard material configuration, which has a wide range of material options.
Application
Horizontal centrifugal pump is suitable for water supply, heating, air conditioning system, pressurized water supply, fire sprinkler system, spraying, irrigation, swimming pool, fountain water supply and so on.
Horizontal type, using extended coupling, single-stage radial split volute (pump size larger than 125 adopts two-stage design) adopts back-pumping design, with replaceable shaft sleeve/shaft protection sleeve and replaceable pump body sealing ring, and the design conforms to ATEX；
Read More
Product overview Horizontal, single-machine direct-connected single-stage radial split volute, rated power conforms to EN 733 standard, with replaceable shaft sleeve and pump body sealing ring, and the design conforms to ATEX
Read More
A vertically installed multistage high-pressure centrifugal pump with annular cross-section design is equipped with suction nozzles and nozzles (pipeline design) with the same nominal diameter and relatively designed positions, which are directly connected and designed according to ATEX；
Read More
CR and CRE pumps are non-self-priming, vertical multistage centrifugal pumps.
Read More
STANDARD MECHANICAL SEAL CAN BE REPLACED WITHOUT REMOVING THE MOTOR FROM THE PUMP (FOR 10, 15, 22, 33, 46,66, 92, 125SV)
Read More
SHS is made entirely of AISI316 stainless steel and is suitable for treating water and non-aggressive or moderately aggressive liquids.
Read More
The product portfolio of the Steady Flygt 1300 series offers great cost-effectiveness and ensures smooth and efficient operation in any application scenarios.
Read More
The product portfolio of the Steady Flygt 1300 series offers great cost-effectiveness and ensures smooth and efficient operation in any application scenarios.
Read More
IPv6 network supported.
