GRUNDFOS CR series vertical multi-stage stainless steel pipeline pumps
CR and CRE pumps are non-self-priming, vertical multistage centrifugal pumps.
Model :
CR45-10Imported caliber (DN) :
32Export caliber (DN) :
25Rated flow (m³/h) :
40Rated head (m) :
220Motor speed (rpm) :
2900Motor power (kw) :
37Material :
All cast ironVertical Multi-Stage Stainless Steel Pipeline Pump
Technical parameters:
Flow rate, q: max. 336 m³/h
Head, h: up to 362 m.
Pressure, p: max. 40bar
Temperature, t:-30℃-+120℃
Product overview
CR and CRE pumps are non-self-priming, vertical multistage centrifugal pumps.
The pump is equipped with Gryffindor standard motor (CR pump) or variable frequency motor (CRE pump).
The pump consists of a pump base and a pump head, and the runner cavity assembly and the outer cylinder are located between the base and the pump head and fastened by fastening bolts. The inlet and outlet of the pump are located on the base and on the same axis (pipeline type).
All pumps are equipped with a packaged maintenance-free mechanical shaft seal.
Application
supply water
Flushing and cleaning system
Water rationing in waterworks
Humidifying system
water treatment system
Process supercharging system
Air conditioning system in the factory
Industrial cooling system
Industrial refrigeration system
Casting and casting equipment
Steam boiler system
condenser system
sprinkling irrigation system
chemical industry
Horizontal type, using extended coupling, single-stage radial split volute (pump size larger than 125 adopts two-stage design) adopts back-pumping design, with replaceable shaft sleeve/shaft protection sleeve and replaceable pump body sealing ring, and the design conforms to ATEX；
Read More
Product overview Horizontal, single-machine direct-connected single-stage radial split volute, rated power conforms to EN 733 standard, with replaceable shaft sleeve and pump body sealing ring, and the design conforms to ATEX
Read More
A vertically installed multistage high-pressure centrifugal pump with annular cross-section design is equipped with suction nozzles and nozzles (pipeline design) with the same nominal diameter and relatively designed positions, which are directly connected and designed according to ATEX；
Read More
CR and CRE pumps are non-self-priming, vertical multistage centrifugal pumps.
Read More
Single-stage pipeline centrifugal pump, equipped with a standard motor and a mechanical shaft seal. The pump has a direct-coupled structure, and the bare pump and the motor are independent units.
Read More
The NBG pump has a direct-coupled structure and is equipped with a fully enclosed fan-cooled standard motor. The main dimensions meet the IEC and DIN standards. The installation methods are B35 (IM2001) or B5 (IM3001).
Read More
NKG pump is a long shaft structure, equipped with a fully enclosed fan-cooled standard motor. Its main dimensions meet IEC and DIN standards, and its installation method is B3(IM1001).
Read More
CM and CME pumps are non-self-priming horizontal end-suction multistage centrifugal pumps. CM pump is equipped with power frequency motor, while CME pump motor has built-in frequency controller. Cm and CME pumps are equipped with mechanical seals
Read More
IPv6 network supported.
