SD submersible water pump for deep well is a high-efficiency fluid transfer equipment specially tailored for deep well water extraction scenarios. It adopts an integrated submersible structure design, with pump casing made of AISI 304/201 stainless steel and impeller made of plastic. POM.
Model :
4SD2/15Export caliber (DN) :
1 ½"Rated flow (m³/h) :
1.5Rated head (m) :
73Motor speed (rpm) :
2850Rated output power（KW） :
0.55Material :
AISI304/201 SS pump external casing ；plastic.POM impeller
SD Submersible Water Pump For Deep Well
SD Submersible Water Pump For Deep Well
SD submersible water Pump for weep well is a high-efficiency fluid transfer equipment specially tailored for deep well water extraction scenarios. It adopts an integrated submersible structure design, with pump casing made of AISI 304/201 stainless steel and impeller made of plastic. POM.
Applications
For water supply from wells or reservoirs.
For domestic use, civil and industrial applications.
For garden use and irrigation.
Operating conditions
Maximum fluid temperature up to +35°C.
Maximum sand content : 0.25%.
Minimum well diameter : 2.5"/3"/3.5"/4"/5"/6"
Motor and Pump
Three-phase: 380V/50Hz
Single-phase: 220V/50Hz or 220V/60Hz
Equip with start control box or digital auto-control box
Pumps are designed by casting stressed
Curve tolerance according to ISO 9006
Options on request
Special mechanical seal
Other voltages
Single phase motor with built-in capacitor
Horizontal type, using extended coupling, single-stage radial split volute (pump size larger than 125 adopts two-stage design) adopts back-pumping design, with replaceable shaft sleeve/shaft protection sleeve and replaceable pump body sealing ring, and the design conforms to ATEX；
Read More
Product overview Horizontal, single-machine direct-connected single-stage radial split volute, rated power conforms to EN 733 standard, with replaceable shaft sleeve and pump body sealing ring, and the design conforms to ATEX
Read More
A vertically installed multistage high-pressure centrifugal pump with annular cross-section design is equipped with suction nozzles and nozzles (pipeline design) with the same nominal diameter and relatively designed positions, which are directly connected and designed according to ATEX；
Read More
CR and CRE pumps are non-self-priming, vertical multistage centrifugal pumps.
Read More
SD submersible water pump for deep well is a high-efficiency fluid transfer equipment specially tailored for deep well water extraction scenarios. It adopts an integrated submersible structure design, with pump casing made of AISI 304/201 stainless steel and impeller made of plastic. POM.
Read More
IPv6 network supported.