4SA series submersible deep well pump is a type of pumping equipment specifically designed for underwater operation in deep wells. Composed of a hermetically sealed motor and a pump body, these pumps work synergistically to deliver water to the surface.
Model :
4SA05/25Export caliber (DN) :
1 ¼"Rated flow (m³/h) :
0.9Rated head (m) :
113Motor speed (rpm) :
2850Rated output power（KW） :
0.754SA series submersible deep well pump
4SA series submersible deep well pump is a type of pumping equipment specifically designed for underwater operation in deep wells. Composed of a hermetically sealed motor and a pump body, these pumps work synergistically to deliver water to the surface.
Operating conditions
Maximum fluid temperature up to +35C.
Maximum sand content : 0.25%.
Minimum well diameter : 4".
Motor and Pump
Three-phase: 220V/50Hz or 380V/50Hz
Single-phase:110V/50Hz or 220V/50Hz
Equip with start control box or digital auto-control box
Pumps are designed by casting stressed
Curve tolerance according to ISO 9906
Options on request
Special mechanical seal
Other voltages
Single phase motor with built-in capacitor
Applications
For water supply from wells or reservoirs.
For domestic use, for civil and industrial applications.
For garden use and irrigation.
Horizontal type, using extended coupling, single-stage radial split volute (pump size larger than 125 adopts two-stage design) adopts back-pumping design, with replaceable shaft sleeve/shaft protection sleeve and replaceable pump body sealing ring, and the design conforms to ATEX；
Read More
Product overview Horizontal, single-machine direct-connected single-stage radial split volute, rated power conforms to EN 733 standard, with replaceable shaft sleeve and pump body sealing ring, and the design conforms to ATEX
Read More
4SA series submersible deep well pump is a type of pumping equipment specifically designed for underwater operation in deep wells. Composed of a hermetically sealed motor and a pump body, these pumps work synergistically to deliver water to the surface.
Read More
A vertically installed multistage high-pressure centrifugal pump with annular cross-section design is equipped with suction nozzles and nozzles (pipeline design) with the same nominal diameter and relatively designed positions, which are directly connected and designed according to ATEX；
Read More
CR and CRE pumps are non-self-priming, vertical multistage centrifugal pumps.
Read More
IPv6 network supported.