KSB ETL Series Single-stage Vertical In-Line PumpETL 1 25-125-250 GG
Pump body and standard motor directly connected pipeline circulating pump; Pipeline single-stage volute pump
Model :
ETL 125-125-250 GGImported caliber (DN) :
125Export caliber (DN) :
125Rated flow (m³/h) :
150Rated head (m) :
20Motor speed (rpm) :
1450Motor power (kw) :
15Material :
Cast iron/316FOB Price （USD$） :
27292Single-stage Vertical In-Line Pump
Product overview
Pump body and standard motor directly connected pipeline circulating pump; Pipeline single-stage volute pump, with non-magnet KSB SuPremE motor with energy efficiency class IE4/IE5 and PumpDrive speed regulation system, the pump is rigidly connected with the motor shaft. With an energy efficiency class of IE4/IE5 (according to the IEC TS 60034-30-2:2016 standard), the magnet-free synchronous reluctance motor KSB SuPremE (except that the motor with the size of 0.55 kW/0.75 kW and the speed of 1500 rpm is provided with permanent magnets) is operated in coordination with the KSB PumpDrive 2 or KSB PumpDrive 2 Eco speed regulation system without rotor position encoder. The fixed point conforms to EN 50347 standard, and the shell size conforms to DIN V 42673 (07-2011) standard. ATEX type can be purchased.
Main application
Industrial water equipment, heating equipment, industrial circulation system, air conditioning equipment, cooling circuit, water supply equipment.
Pumped medium
A liquid that has no chemical or mechanical attack on materials.
Horizontal type, using extended coupling, single-stage radial split volute (pump size larger than 125 adopts two-stage design) adopts back-pumping design, with replaceable shaft sleeve/shaft protection sleeve and replaceable pump body sealing ring, and the design conforms to ATEX；
Read More
Product overview Horizontal, single-machine direct-connected single-stage radial split volute, rated power conforms to EN 733 standard, with replaceable shaft sleeve and pump body sealing ring, and the design conforms to ATEX
Read More
A vertically installed multistage high-pressure centrifugal pump with annular cross-section design is equipped with suction nozzles and nozzles (pipeline design) with the same nominal diameter and relatively designed positions, which are directly connected and designed according to ATEX；
Read More
CR and CRE pumps are non-self-priming, vertical multistage centrifugal pumps.
Read More
IPv6 network supported.
