Induction motor, compact structure, fan self-cooling, self-lubricating sealed bearings, low noise and long life; single-phase with embedded thermal protector and starting capacitor, three-phase motor energy efficiency meets IE2 standard, high efficiency; with thermal protector and starting capacitor, high motor energy efficiency rating; pump body, bracket and flange surface electrophoretic treatment, high anti-corrosion performance, excellent hydraulic performance, in line with CCC standards (K270/25HIT, K310/31HIT not included), 24-month warranty.
Model :
K40/3HIImported caliber (DN) :
25Export caliber (DN) :
25Rated flow (m³/h) :
2.1Rated head (m) :
2.7Rated input power（KW） :
0.16Rated output power（KW） :
0.025Material :
Pump body: Cast iron / Impeller: Engineering plasticHot Water Circulating Pump
Technical parameters:
Working scope: maximum flow: 25.6m3/h,
Maximum lift: 31m
Maximum working pressure: 10bar,
Liquid temperature range:-10℃-+120℃
Product introduction:
KHI series hot water circulating pump adopts compact design structure, equipped with high-protection motor, which radiates heat and is cooled by fan, and has excellent hydraulic curve performance.
Scope of application:
Small and medium-sized hot water circulation in homes and hotels, solar collectors, air thermal water tanks, heating;
Cold and hot water circulation of small and medium-sized central air conditioning;
Water supply for small farms, farms and factories, etc.
Horizontal type, using extended coupling, single-stage radial split volute (pump size larger than 125 adopts two-stage design) adopts back-pumping design, with replaceable shaft sleeve/shaft protection sleeve and replaceable pump body sealing ring, and the design conforms to ATEX；
Read More
Product overview Horizontal, single-machine direct-connected single-stage radial split volute, rated power conforms to EN 733 standard, with replaceable shaft sleeve and pump body sealing ring, and the design conforms to ATEX
Read More
A vertically installed multistage high-pressure centrifugal pump with annular cross-section design is equipped with suction nozzles and nozzles (pipeline design) with the same nominal diameter and relatively designed positions, which are directly connected and designed according to ATEX；
Read More
CR and CRE pumps are non-self-priming, vertical multistage centrifugal pumps.
Read More
Induction motor, compact structure, fan self-cooling, self-lubricating sealed bearings, low noise and long life; single-phase with embedded thermal protector and starting capacitor, three-phase motor energy efficiency meets IE2 standard, high efficiency; with thermal protector and starting capacitor, high motor energy efficiency rating; pump body, bracket and flange surface electrophoretic treatment, high anti-corrosion performance, excellent hydraulic performance, in line with CCC standards (K270/25HIT, K310/31HIT not included), 24-month warranty.
Read More
IPv6 network supported.
