Blog

  For heating and cooling systems: Individual challenges require individual solutions   For heating and cooling systems: Individual challenges require individual solutions   Clean air and the right air humidity and temperature: Creating an optimal indoor climate is the basic prerequisite for comfort and efficiency – for humans and machines alike.   Whether it’s a family home, an office complex or a computer centre: Every building is different and presents specific challenges in the planning and implementation of an optimal heating, air conditioning and ventilation system. Effective and efficient HVAC systems require suitable, individual components that are matched to one another.   The challenges vary depending on the building project, but the requirements placed on the components remain the same. The pumps and valves used should function reliably, quietly and have a long service life.   In addition to functionality, however, the economic and ecological parameters of heating and cooling systems in building technology are equally important. The efficient use of energy is one of the most important topics.   KSB products are the basis for perfectly matched and efficient HVAC systems   KSB is the only supplier on the market that offers a complete range of products for heating, air conditioning and ventilation systems – including pumps, valves as well as automation and drive solutions. This allows you to select the right components for your system with the right characteristics.   Efficient components that are optimally matched to each other meet all requirements for heating, air conditioning and ventilation systems – whether in a family home or an airport. KSB products are therefore always the basis for an overall perfectly coordinated and efficient HVAC system.   A comprehensive range of services from a single source rounds off the KSB portfolio for heating and cooling in building technology.     Horizontal volute casing pump, single-stage, with ratings and main dimensions to EN 733, long-coupled, back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves and casing wear rings, with motor-mounted variable speed system. With KSB SuPremE, a magnetless synchronous reluctance motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation on a KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.   Technical Data Max. flow rate                                                        1368 m3/h Max. head                                                              160 m Max. allowed working pressure                             16 bar Maximum allowable fluid temperature                 140 °C   Main Applications Handling clean or aggressive fluids not chemically and mechanically aggressive to the pump materials. Water supply systems Cooling circuits Swimming pools Fire-fighting systems General irrigation systems Drainage systems Heating systems Air-conditioning systems Spray irrigation systems   Benefits Improved efficiency and NPSHreq by experimentally verified hydraulic design of impellers (vanes) Operating costs reduced by trimming the nominal impeller diameter to match the specified duty point Little wear, low vibration levels and excellent smooth running characteristics thanks to good suction performance and virtually cavitation-free operation across a wide operating range Large variety of materials as standard for perfectly matching the pump to the fluid handled PumpDrive perfectly matched to pump and motor by default factory parameter settings Motor-mounted variable speed system up to 45 kW saves space Pump operation made fully transparent with PumpMeter The efficiency of the motor also exceeds 95 % of the nominal efficiency when the motor runs at 25 % of its nominal power on a quadratic torque-speed curve. Sustainable and environmentally friendly because no magnets based on “rare earth elements” such as NdFeB are used     Technical Data Function                                                             Pump Connection type                                                 Flange Drive concept                                                     With electric actuator,                                                                           Combustion engine Max. flow rate                                                    1368 m3/h Min. flow rate                                                     1.5 m3/h Max. head                                                          160m Min. head                                                            2 m Mains frequency                                                 50 Hz,                                                                            60 Hz Mains voltage                                                     400 V,                                                                            460 V,                                                                            220 V,                                                                            230 V,                                                                            240 V,                                                                            380 V,                                                                            415 V,                                                                            500 V,                                                                            575 V,                                                                            660V,                                                                             690 V            Casing material                                                  EN-GJL-250/A48 CL 35B,                                                                            CC480K-GS/B30 C90700,                                                                            1.4408/A743CF8M,                                                                            EN-GJS-400-15/A536 GR 60-40-18 Nominal pressure                                                PN 16,                                                                            PN 10,                                                                            CL 150,                                                                            CL 125 Max. allowed working pressure                           16 bar Suction behaviour                                               Non-self-priming Maximum allowable fluid temperature               140 °C Minimum allowable fluid temperature                 -30 °C                                                                                   

In order to solve the problem of stable and safe rural drinking water supply in some towns and villages in the county, AOLI Machinery Group adopts a customized integrated pressure pump station solution to provide more stable and reliable water supply for surrounding residents, injecting strong impetus into the long-term and healthy development of the regional economy. AOLI customized integrated booster pump station This pump station can provide 80 tons of water per hour. Its box adopts an integrated aluminum corrugated core composite aluminum plate corrugated structure and has the following functions and features:     1.Four-layer protective composite structure   It has the functions of heat preservation, moisture-proof, sound absorption and fire prevention. The pump station adopts 50-80mm thick rubber and plastic insulation to ensure that the station can operate normally in an environment of -30℃-+60℃; The tin film adopts 0.2-0.3mm thickness, and the interior surface adopts moisture-proof and sound-absorbing board, with fire prevention grade B1;     2.Comprehensive control system   Control system         It adopts the three-level control mode of "local, on-site automatic, and remote", and has the functions of automatic pressure maintenance, water tank replenishment volume control, remote monitoring system access, and real-time monitoring of pipe network pressure, to ensure the safe and stable operation of the pump station.       3.Standardized and modularized production methods The integrated box frame has been subjected to stress simulation analysis to meet the pressure and load-bearing requirements of the overall hoisting, transportation and operation of the pump station. It can be transported to the site as a whole, hoisted and installed as a whole, and water supply can be realized by connecting water and turning on electricity.          4.Compact structure, small space occupation       The pump station uses a water pump with intelligent peak-shaving, self-priming, anti-dry-running, anti-cavitation, and an embedded swing micro-return valve structure, making the structure more compact, the equipment highly integrated, and reducing the space occupied by the equipment.   Combined with the unique on-site environment, we design customized solutions. Aoli knows that every project is related to the owner's trust in Aoli's quality and service. Based on this, Aoli has always been committed to providing heartfelt services, from solution design to factory processing, every link is meticulous and strives for excellence to ensure high efficiency and high quality.

In the world of industrial fluid management, reliability isn't just a feature—it's the foundation of operational success. That's why global industries consistently turn to KSB, a brand synonymous with German engineering, innovation, and unparalleled quality. But for international clients, accessing these high-performance industrial pumps efficiently and cost-effectively can be a challenge.  Our Deep-Rooted Partnership with KSB At SOOU PUMP, our mission has always been to provide more than just products; we deliver comprehensive pump sourcing solutions. Our long-standing partnership with KSB is built on a shared commitment to excellence. We are not just a reseller; we are an extension of the KSB quality promise, equipped with the technical expertise and logistical network to serve a global clientele. Our position as a leading industrial pump supplier in China gives us unique advantages in inventory, response time, and application support. Witnessing Engineering Firsthand: Our KSB Factory Tour To truly understand the value embedded in every KSB pump, one must witness its creation. We recently had the privilege of visiting a state-of-the-art KSB manufacturing facility, and the experience reinforced our confidence in the brand. As you can see in our video, the factory is a showcase of precision and automation. From the robotic arms handling heavy components with micron-level accuracy to the rigorous, multi-stage quality control checks, every step is designed for perfection. This commitment to advanced manufacturing is why KSB pumps consistently deliver superior efficiency, durability, and lower total cost of ownership. When we export pumps from China, we are exporting this guaranteed quality. The SOOU PUMP Advantage: Why Source KSB Pumps from Us? Choosing SOOUPUMP as your KSB pump exporter provides tangible benefits for your international projects: Competitive Sourcing: Leveraging our strong distribution network in China, we offer highly competitive pricing on a wide range of KSB products, from centrifugal pumps to submersible units. Vast Inventory & Rapid Delivery: We maintain a substantial inventory of popular KSB models, significantly reducing lead times compared to ordering from other regions. We get your project moving faster. Expert Technical Support: Our team consists of experienced engineers who can help you with model selection, system design, and troubleshooting. We ensure you get the right pump for your specific application. Seamless Export Logistics: We are experts in international trade. From secure packaging to customs clearance and global shipping, we manage the entire process to ensure your order arrives safely and on time. Your Global Partner for Pumping Solutions The combination of KSB's world-class manufacturing and SOOU PUMP's dedicated service creates an unbeatable value proposition. We bridge the gap, making premium high-performance industrial pumps accessible to you, no matter where your project is located. Are you looking for a reliable partner to source KSB pumps from Asia? Look no further. Contact the SOOU PUMP export team today to discuss your requirements or request a quote. Let's build a powerful and efficient future, together.

What is a dry-installed pump? As the name suggests, a dry-installed pump means that the pump itself will not be directly immersed in the liquid, but will be installed on the outside of the pipe. In this way, the motor and key components of the pump are kept in a dry environment, avoiding direct contact between the liquid and these components. In other words, this pump is like a "dry worker" who is "away from the water source", which can be said to be a "smart" pump.   Benefits of dry-installed pumps Reduce the number of maintenance times Because dry-installed pumps are away from liquids, motors and other important components can avoid contact with corrosive liquids. After long-term use, the pump will also have less loss, reducing the need for frequent maintenance and extending its service life. Think about it, fewer repairs, not only save money, but also save time!   Safer For many working environments, the safety of the pump is crucial. The design of the dry-mounted pump ensures the safety of key parts such as the motor, prevents direct contact between water and electricity, reduces the risk of electrical failure, and is safer to use.   Easy to install Traditional pumps need to be installed in a pool, underground or inside a pipe, which means that the installation process can be very complicated and time-consuming. Dry-mounted pumps do not require such tedious steps and can be easily installed directly on the outside of the pipe, greatly reducing the difficulty and time of installation.    Energy-saving and efficient Dry-mounted pumps usually use high-efficiency motors and designs to provide efficient water flow at lower energy consumption. Not only can you save energy costs, but you can also achieve ideal work efficiency.    Choose Suou as your trusted supplier. We will personally visit, audit and evaluate the factory to ensure the quality, capacity and reliability of each supplier we recommend.